Believe it or not, changing a dimmer switch can be relatively inexpensive. Keep in mind that the previous wiring in the home might not address your needs when adding a dimmer switch. Hiring an electrician is key. Check out the other dimmer switches in the house. If the dimmer switch is hot to the touch, then the wattage that it controls is more than that amount listed under the plate, so it is overloading and a fire hazard. You also may want to check that the metal box is grounded in the home.
This is important as surges in electricity in a box that is not grounded can go wherever it wants to and cause electrocution or death. You can check this with a voltage tester. Lastly, if you look around your house and you see two-prong outlets, this is also a sign that the metal box is not grounded.
So, you will need to switch all the outlets to three-prong where you will have the copper wire in that third slot that connects the grounding to the entire home. Anytime you are dealing with electricity in your home, it is a great idea to consult a licensed electrician. Knowing what wires were used in your home is important before making changes to your electrical outlets.
You will want to check the type of outlet installed before replacing it with any other type of switch. This will avoid potential fire and disaster of the home. Lastly, call on your local home inspection team to conduct a full home inspection and provide you with a reputable licensed electrician. You can install a ceiling fan light dual dimmer switch to operate the fan speed and light intensity from the original wall switch location.
The new switch does require an additional electrical wire to separate the light from the fan in order to operate correctly. Turn on your ceiling fan at the light switch. Ensure the blades are turning and the lights are burning. Find the or amp breaker inside your breaker box that powers the ceiling fan.
Turn the breaker off to disconnect the electricity. The ceiling fan lights will be off and the fan blades will stop turning when you turn off the correct breaker. Hold a noncontact voltage tester against the ceiling fan wall-switch cover plate. The indicator bulb on the tester will not light when electrical power is not present at the switch.
Remove the screws holding the cover plate on the ceiling fan switch. Touch the tester to the two black electrical wires attached to the side of the ceiling fan switch to ensure the power is disconnected.
Release the ceiling fan canopy from the hanging bracket on the ceiling by removing the two to four screws holding it. Let the canopy rest against the ceiling fan motor so you can test the wires connecting the ceiling fan to the electrical wires inside the fan's electrical box.
Hold the tester against the black electrical wires connected together with a wire connector. Although you turned off the correct breaker, double-check for power before disconnecting the wires. Untwist the connectors holding the wires from the electrical box to the ceiling fan's electrical wires. Lift the ceiling fan from the hanging bracket and set it on a stable work surface. Release the ceiling fan wall switch from the wall by removing the two screws holding it in the electrical box.
Loosen the two terminal screws on the side of the switch in order to release the black electrical wires. They also often have a light fixture in the middle of the blades so that you can position both your light and fan in the optimal position of the ceiling. There is no use having a fan in the corner of the room where no one will be able to feel the benefits.
It will be an awesome feature piece and give your room a vintage and rustic feel to it. Ceiling fans are typically electrically powered and therefore need to be wired into your house. They are operated by a switch either on the fan or mounted onto the wall. Traditional switches turn the light on to one setting of brightness, and allow the fan to turn at one speed. If you wanted more customization of your ceiling fan, opting for a dimmer switch may be the way to go.
Ceiling fan dimmer switches are great alternatives to boring push switches when you want to spice up your home. You can create an ambiance with the lighting, use it to start winding down before sleep, or simply use less energy than you were previously.
What makes dimmer switches so great is that they also only take a matter of minutes to install, making them a great DIY project for busy homeowners. Having said that, nothing is perfect, and unfortunately dimmer switches are much more likely to become overloaded than other types of wall control switches.
If a switch is overloaded for too long, it could cause a fire. By all means, you can connect a ceiling fan directly to a dimmer switch, but you may run into problems along the way. An example of this is that the motor in your fan could be damaged and rendered useless.
A broken ceiling fan motor and a house fire are obviously not ideal outcomes, however, there is some good news.
These hazards are generally associated with standard dimmer switches, and you can actually get models that are designed for use with ceiling fans.
These allow you to control the speed of your fan quickly, easily, and without worry of dangerous outcomes. Read our guide to find out does a ceiling fan need a wall switch at all?
0コメント