As mentioned earlier, every solution brings along a few other problems. In the case of SD cards or memory cards, the problem is that you are often bound to find your card unread by your computer.
While the reason might not always be the same, if the problem persists, it is said to be that your SD card or memory card is corrupted. Why your SD card might not be responding even after being connected to a computer? In certain cases, the problem might be logical damage or physical damage.
However, fixing is the second stage. The primary stage is to fully understand the reason behind why your SD card is not showing up on Windows 7, Windows 8, or Windows Determining the reason will help you better get to the crux of the problem. A lot many times, there is an issue of connection. This connection issue can be due to a damaged card reader, adaptor, or a damaged USB port. The problem might not be in the SD card but in any of the connection points, which leads to you not seeing the Card's files.
There is a little trigger kind of a thing at the side of your SD card. Sometimes, while handling the card, the trigger gets turned on. Thus, rendering the SD card as 'write protected. Check your card for the same. While the hotplug is supported by most SD cards now, consistent and frequent operation of the same might lead to a corrupt file system or metal wires.
A hotplug means that you can remove or insert your card from your device even while running. Without a driver letter, a partition cannot be accessed in Windows Explorer. In case your SD has lost its driver letter, it will not be displayed in the system. If your SD card can be seen with a yellow mark in the Device Manager but is not showing up in the system, then it can be concluded that there is something wrong with the SD card's drivers.
Another common phenomenon is that your SD card's partition gets deleted. Have a look at detailed steps:. Warning: This operation will erase all data on SD card. Install and run the software. Choose one among the listed file systems. If you want, you can also change cluster size of or add partition label to the SD card partition.
Return to the main interface. If your SD card not showing up after upgrading to Windows 10, you can try to fix this issue by upgrading driver for SD card. After having a basic understating of the events that can lead to SD card not showing up or recognized properly in Windows 10, you can refer to the solutions that will be presented in the following text and try one or more ways. If they are covered with dust, there will not be a good contact between them and the 64GB SD card could not be recognized by Windows.
Therefore, you should make them keep clean, so that the SD card can be recognized. If not, try to unplug SD card from this computer and connect it to another computer to see whether the problem is with the computer. Here are the steps:. In this way, your SD card will be wiped completely and you will lose all the data. Tips : If you mistakenly deleted or lost important files, make sure to try to get them back with the Best File Recovery Software.
The program can also back up your SD card as image file. The problem could also happen on Android phones. We hope the solutions in this article would help you restore both the storage device and your precious data.
Feel free to let us know your opinions and questions in the comment. By Jihosoft Last updated on November 5th, Toggle navigation. Home current Store Products Resource Support. Test the SD card on another PC.
0コメント