You have been warned. The RadioReference Wiki. Allows full control and configuration of these models, as well as monitoring, logging and audio recording, when used with a compatible USB cable, among many other Win features The software is written by DonS of starrsoft. What doesn't work So far, most features of Win appear to work, with the following exceptions: Versions tested: Win 1. Saving configuration to file after upload to scanner often crashes with "Application exception" Many interface "glitches", such as flickering, and slow window redraws when monitoring scanner LCD.
How to run These instructions don't include basic software use, just how to install it under Wine. Wipe your. PREV" to preserve the old and move it out of the way. Recent documented abuses by law enforcement officers who have covered up activities or mistakes by abusing laws originally meant to protect victims are a prime example. Please copy any information you want or need from this site prior to December, For additional details see the RadioReference Utah forum.
Please go to Starrsoft. WIN Latest Version 2. Whistler WS - WS It is considered scanning in "Open Mode" if there is a Wildcard in working memory while scanning. A Wildcard allows reception of radio traffic from any active Talk Group in a trunked radio system. It now takes a some time for the software to collect the data so be patient.
Click "OK" then click "Done. Repeat the above process until all the Trunked Systems you want to import are displayed in Win, then procede to the next step. Please Read: If there are conventional frequencies you want to add to your programming for uploading to your scanner, go to the section titled Conventional Frequencies and follow the instructions for adding those.
You can highlight a group and only make one selection for the whole group or you can assign each one individually. The scanner will reboot itself and then should start scanning automatically after uploading. If not, press SCAN. You might also have to press the number 1 key on the scanner to enable the 1 Scan List.
Everything you want in your scanner has to be done in one upload, make sure you have all the Trunked Systems and Conventional Frequencies showing in Win before you upload the information.
Click on "ID" below the window. If you do not click below the window, when you do the next instruction a new System will be added above the window instead. The TG added will be a Wild Card TG and can be scanned as a Wild Card or you can edit it to make a specific TG by changing the information in the fields on that line ID numbers will be assigned by the program automatically. This image shows what it looks like after adding four additional spaces for TGs.
Even though the text in the image says the added TGs will default to Scan List 1, that no longer may be the case with the newest updates to the WIN software since Aug. Be sure to check the Scan List assignment. Double click "Talkgroup" in the Alpha Tag field to change it for editing and type in the alpha tag you want to use for that TG.
You can always leave one as a Wild Card TG, too. Make sure these new TGs are in the scan list where you want them, then upload the changes to the scanner and save them to your WIN file on your computer. So you want to add more than one or two TGs to an existing system in your scanner. How to do it the least painful way using WIN? The easiest way to add a block of TGs to a system that has been previously imported is to do another import from RR.
Make a note of that number see image below. Windows is not supported by ScanSnap software distributed after August 1st , such as driver, scanning software, or update. Setup Programs. Setup Programs The following table shows which ScanSnap software are available for download as complete versions. The online update function is not available for the ScanSnap S software. Note An important notice on vulnerability for this software. Third party software is not available for download because PFU is not authorized to distribute the software.
0コメント